Advantages Internet

HARDWARE SET-UP

Insert one end of the RJ-11 telephone cable supplied with the kit into the modem's DSL port, and the other end into an unfiltered telephone wall jack.
Insert one end of the RJ-45 Ethernet cable into your modem's E-Net port, and the other end into the computer's Ethernet card.
Connect the power supply to the modem and into a power outlet. Turn the High Speed modem on. The modem's Power, DSL, and Ethernet light should turn solid green in the next 60 seconds.
If your telephone wall jack canot be near your modem, it is recommended that the RJ-11 telephone cable you use be no longer than 15 feet in length to avoid service interruption

MAC OS 8-9 SETUP

Download Advantages Internet High Speed software and run the Setup.exe file.
Click on Next, choose Quick Install and click on Next
The installation software may prompt a message saying "This software does not run correctly...", please ignore and click on OK.
Once the installation software asks you to reboot your computer, click OK to continue.
Click on the EnterNet 300 icon that should now appear on your Desktop
Click on Create a New Profile
Type Advantages Internet as your new connection and click on Next.
Enter your username (userid@avantagesinternet.com), and password, and click on Next.
The software may prompt a message saying it has "Failed to locate the servers on your network". Please ignore this message and click on Next, followed by Finish.

MAC OS X SETUP

Click the System Preferences icon.
In the System Preferences window, click the Network icon.
In the Show pull-down menu, select the Network Port Configurations (for older versions, click Advanced or Active Network Ports in the Configure menu.
Make sure there is a checkmark beside the Built-in Ethernet. You can uncheck any other ports (ex. Internal Modem).
In the Show pull-down menu, select the Built-in Ethernet. (for older versions, click Built-in Ethernet in the Configure menu.)
Click the PPPoE tab.
Check the Connect Using PPPoE box.
In the Service Provider box, type Advantages Internet. In the Account Name box, type your username (userid@avantagesinternet.com) and your password in the appropriate box.
Check the Save Password and the Show PPPoE status in menu bar option.
Click the PPPoE Options button.
Click on Save or Apply Now depending on the version of your system..
Click the TCP/IP tab.
In the Configure pull-down menu, select the Using PPP item. Leave the DNS Servers and Search Domains boxes empty.
Click on Save or Apply Now depending on the version of your system and quit System Preferences.

To connect to the Internet:
In the Finder, click the Go menu, then click Applications. In the Applications window, double-click Internet Connect.Click the Connect button in Internet Connect.

To disconnect from the Internet:
Click the Disconnect button in Internet Connect.